PSS connects to two outside partners that help your technicians test and balance water:
- LaMotte digital meters — the WaterLink Spin Touch and the ColorQ 2X send their test results straight into the visit over Bluetooth, so nobody types readings by hand.
- Orenda — a water-chemistry expert team. From the web app or the mobile app you send a property’s history to Orenda and get expert advice back by email.
Both work inside the PSS mobile app with no extra login or subscription on the PSS side. This section shows how to use each one.
The PSS mobile app reads results from two LaMotte meters over Bluetooth. The results land in the Readings of the visit or job you have open, the same fields you would otherwise type into.
Supported meters:
- LaMotte WaterLink Spin Touch — runs a full disc of tests in one spin, then sends all the results at once (see 31.2).
- LaMotte ColorQ 2X (any 2X model with Bluetooth) — runs one test at a time and sends each result as soon as you move to the next test (see 31.3).
Other meters, including older ColorQ models without Bluetooth, do not connect to PSS. You can still type their results in by hand.
What you need:
- The PSS mobile app, signed in as a technician (see 30.1).
- Bluetooth turned on in your phone.
- Permission for PSS to use Bluetooth. The first time you tap Digital Meter, your phone asks. Tap Allow. On Android, also allow Nearby devices (and location, if asked).
- Bluetooth turned on in the meter (see each meter’s steps below).
Note: You do not pair the meter in your phone’s Bluetooth settings. Leave it unpaired there. The PSS app finds and connects to the meter on its own.
What gets filled in:
| Meter test | PSS reading |
|---|---|
| Free Chlorine | Free Chlorine |
| Total Chlorine | Total Chlorine |
| Bromine | Bromine |
| pH | pH |
| Alkalinity | Alkalinity |
| Calcium Hardness | Calcium Hardness |
| Cyanuric Acid (CYA) | Cyanuric Acid |
| Salt | Salt |
| Borate | Borate |
| Phosphate | Phosphates |
| Iron | Iron |
| Copper | Copper |
| TDS (ColorQ 2X only) | TDS |
| Water Temperature (ColorQ 2X only) | Water Temperature |
A result only fills a reading your company shows on the visit. If your office hid a reading in the readings setup, the meter’s value for it is skipped. Ask your office to turn the reading on if you need it.
Tip: PSS remembers the last meter you connected. Next time you tap Digital Meter, it connects to that meter automatically as soon as it finds it.