The Spin Touch runs every test on the disc in one spin. When the spin finishes, you send all the results to PSS with one tap on the meter.
On the meter (one-time setup):
- Open the Spin Touch Settings menu.
- Tap Bluetooth.
- Turn on Bluetooth Enabled.
At the pool:
- In the PSS app, open the stop and tap Arrived at Property (see 30.3).
- Scroll to Readings and tap Digital Meter. The Choose Digital Meter screen opens and the app starts Scanning for devices…
- Your meter appears in the list with a name that starts with SpinTouch-. Tap it.
- Wait for the check mark next to the meter. The app shows Connected: Press Send on Meter.
- Run your test on the Spin Touch as usual: fill the disc, insert it, and start the spin.
- When the results screen appears on the meter, tap the Send button (the Bluetooth / paper-airplane icon).
- PSS fills the readings, disconnects from the meter and returns you to the visit.
- Check the values, then finish the rest of the visit.
Note: The results only reach PSS when you tap Send on the meter. If you skipped it, keep PSS on the Choose Digital Meter screen, open the result in the meter’s test history and send it from there. If that does not work, type the values in by hand.
Note: Spin Touch tests that PSS does not track (for example a test your disc runs that has no matching PSS reading) are skipped. Everything else on the disc comes across, including 3-way and 60-second chlorine tests.
To stop without reading, tap Cancel at the top of the Choose Digital Meter screen.